Showing posts with label theatrical prosthetics. Show all posts
Showing posts with label theatrical prosthetics. Show all posts

Thursday, February 8, 2024

SyFy Bartow!

MoonPhaze will have a booth next Saturday (Feb 17) at the Syfy Bartow street festival. This is a festival we try to attend every year, but sometimes, life intrudes, and we don’t get there. For instance, last year, my husband was sick in February, and we didn’t make it.

This year, we will be located in the next to last block on the east end of Main Street in downtown Bartow (FL), between Florida and Hendry Avenues. This will be a new area for us; we have mostly been located on the western end of the festival. Booths will be lined up along Main Street and several side streets.

We are planning to take books and some small cosplay prosthetics (ie, wounds, cyborg pieces, and so on) to sell. But our vehicle also needs to carry displays and stuff for the KAG (Klingon Assault Group) area, so I am limited in how much I can take. I also have to take a table, at least 2 chairs, a gazebo to provide shade, a cooler of cold drinks and some snacks to get us through the day.

The festival runs from 11 AM to 6 PM. Hundreds of vendors, cosplay, a costume contest, food trucks, a car show, music and other entertainment… what more could you ask for? Attendance is free. Cosplay is encouraged. Hope to see you there! 

Saturday, February 26, 2022

It's Over

The street festival I was working so hard to get ready for is over, and I can relax. The fact is, we don't have any more appearances scheduled, so it's hard to work up a lot of enthusiasm for 'getting ready'.

On the other hand, I have some watermelon product that doesn't have a long shelf life while in the liquid form, so I've got to get it into molds and let it solidify. So I am doing that. That only takes 5-10 minutes of an evening. (And then let it cure for 24 hours.)

If you've been reading along with these posts, you may be wondering how I did. The answer is, "Better than I've done in the past, but not great." However, I had a lot of interest in looking at my prosthetics, now that they were displayed in a way that people could see what I had. I even had Mandalorians and Star Fleet officers stop by to look them over, and a couple people who said, "I'll be back," who didn't manage to come back before the festival closed.

Next year's SyFy Bartow will be themed for Star Trek. The Klingons had great success this year at their booth, and have suggested that I ask to be located next to them next year. That way, I'm right there, ready to sell a bumpy forehead to those who want to jump into Klingon-dom right away. They also suggested that I 'paint' foreheads on people with make-up, as a cheaper way to 'live the experience'. I'll have to practice my painting skills between now and then. Thankfully, I have a practice dummy head, so I can do that. What I don't have is a broad range of skin-tone make-up, so I'll need to get some more of that.

On the other hand, I rather liked where I was located this year. Fairly centrally located, and yet, only a few feet away from the dog adoption booth. Everybody wants to go see the dogs. And I'm happy to report that they adopted out all their dogs by about 4 pm. Not that I had anything to do with that, but I'm happy to see so many dogs find happy, forever homes.

I also had quite a few requests for 'elf ears' or 'Vulcan ears', but I haven't created any of those yet. Like me, the people asking didn't want the '1-size fits all' ears that are out there, they wanted something that would glue to the tops of their ears. Now that I've got Bjoran noses, I suppose I'd better get started working on ears.

So, yeah, I have stuff I need to do to get ready for the next show, whenever it might be. I'd better put some goals on my To Do list so I don't forget to work on these projects.

Friday, February 18, 2022

We're on a Collision Course!

I'm writing this Wednesday night. Bartow is Saturday, so I've got 2 days to get everything done, packed and loaded in the car. How am I doing? Am I going to make it?

In one sense, yes, I'll make it, because whatever I get done and packed is what I'll have to work with. In another sense, no, I won't, because making 'a few' more copies of small prosthetics that I've never had very many of has turned into... well, a learning experience, I guess.

Prosthetics Display Project - Done. Hubby even inscribed 'Myers Prosthetics' in the 2 base boards today. The rods to hold up the foam heads are packed, the foam heads are packed.

Final Prosthetics on Display - Still not done. I have 2 - 4 small prosthetics that need to be painted and glued to the final foam head. With a little luck, I'll get that done tomorrow. Assuming the latex versions I'm trying to make come out okay in the morning.

Signage - Done and Packed. Unless I think up some humorous signs to post. Might happen.

Making some small prosthetics - Ugh! I realized I had very few cyborg relays (from 7 of 9's cheek) and cyborg eyepieces (also from 7 of 9), and I thought I could pop out a few of each in watermelon, which is a new product, which takes less time than latex to dry in the mold. But when I looked around for a mold for them, the only one I could find was for dragonskin. (Didn't really want to drag out the dragonskin chemicals every day to make a tiny little batch.) I also had recently sculpted a Bjoran nose ridges piece that hadn't been made into ANY kind of mold yet.

We have some clay that you can melt and pour into a mold and let it harden to make what I call a 'plug'. It's got all the details that were in the original mold, and then you make another mold using those plugs. Small prosthetics like this are usually done several at a time, in a sheet mold.

So, I had to affix my plugs to a smooth tile, which required getting out the heat gun to soften up the plug backs so the clay would adhere to tile. Kind of overheated my Bjoran nose plug, which was made from sculpting clay, so I spent a couple hours fixing what I had sculpted and finally got it attached to the tile. Then I spent most of a day building a box around the plugs before I could pour in the plaster. Then I got really busy doing other stuff for a day. So the plaster was good and cold by the time I got back to it.

First, I had to take apart the box. The Bjoran nose plug came out with no problem. Horray! However, I used the wrong mold release for the melting clay, so I couldn't get those plugs out. I finally resorted to using the heat gun again, and got most of the clay out, although my details weren't very clear inside. I called people, told them what I had done, and asked if there was anything I could do to clear out the rest of the stuff. I was told to soak the cavities in alcohol and use a wooden pick to pry out the remaining bits of clay. I might have to do that several times. Well, eventually, I felt like I had cleaned it out as best I could, so yesterday afternoon, I put a layer of latex into those molds. Latex is the cheapest prosthetic material, so I felt if it pulled out little bits and pieces of clay, I wouldn't be wasting a lot of money. Today I started casting in earnest. If all goes well, I'll have new prosthetics to pull tomorrow. Do another set tomorrow to pull Friday, then package and pack them. I still won't have a lot of them, so I'll be casting new ones even after Bartow.

Wish me luck.

Thursday, February 10, 2022

It's Getting Closer

Only 10 days to SF Bartow.

How am I doing on getting ready?

Foam Head Display - We got the supplies we needed, but they've just been sitting in the garage, so far. Need to get out there and start cutting and drilling. Which means measuring the foam heads so we don't get them placed too close to each other. I don't have many power tools I use, so part of this will take the help of my husband. Maybe we can get out there and work on that tomorrow.

Foam Head Display - I took one of my small prosthetics off its display head and cleaned the make-up off it because the prosthetic is supposed to be metal, and white make-up just didn't look right. This is one of 2 cyborg prosthetics I offer, and I only have 1 or 2 copies of each one at this time, so I was going to make some new molds of these and a new design I've recently sculpted and make some out of watermelon plastic, that being the fastest way to make them. Today, I got a tile cleaned and ready to be used, and I melted some clay and poured it into the existing molds, which I placed in the freezer to get good and hard so I can just pop those suckers out in the morning. Then I need to 'glue' them onto the tile, build a wall around all of them and make the new molds. Then in a few days, after I've made some, I'll need to paint the cyborg prosthetics and get them packaged... except for the ones I put on the display heads, of course. Those need to be painted and glued.

Sale Signs - I spent about an hour this afternoon starting to make the SALE! signs for the table. Still got quite a long way to go with those.

Signs - I know where my 2 signs are. I know where the base is for the main one. I think I know where the pole is for it. I'd better rummage through the closet and make sure I find it. I also know where tape is, but it isn't yet packed for being taken. I know where the bungee cords are, but don't know if the Klingons will need them. Maybe I should go buy my own supply.

Okay, there's still time to do this, so no need to panic just yet. Just need to get off my duff and get to doing. Good thing I'm between editing projects right now.

Wish me luck.

PS. We are deep into constructing the foam head display. We are done cutting wood and just need to drill holes in the board we are using as a base. All the measuring for that has been done. As for the cyborg prosthetics, I have pulled the castings, and they look great, so I am making progress.

Saturday, February 5, 2022

Looking Ahead

Okay, there's only 2.5 weeks before SF in Bartow. The products I plan to take are packed, but what about other stuff?

What other stuff, do you ask? Well, for one thing, signs. I took 2 signs to Villicon, and couldn't put up either one of them. Our main sign, MoonPhaze, needs a base and pole to hang from. Somehow, the base was taken, but the pole wasn't to be found. So I couldn't put it up. The secondary sign, for Myers Prosthetics, also got taken, but I forgot to take any tape or bungee cords to hang that sign from the front of the table. So, let's see, I need to find the pole for my main sign, and pack either bungee cords or tape (or both) for my secondary sign.

Also, it's one thing to have foam heads displaying prosthetics on a table at an indoor event. It's completely different to use them for an outdoor event, where any tiny little breeze is likely to pick up a foam head and send it tumbling down the street. We've been thinking about how to anchor the foam heads so they can't go roaming on their own. Now it's time to get our act together and make the anchors so they can be packed and ready to go. So, find a couple dowels to stick in the foam heads (they each have a hole some 4 and 1/2 inches deep in the bottom), buy a couple boards to make the bases, and spend a couple hours cutting the wood accordingly. It shouldn't take us long, if we just do it.

And finally, some signs to tape down on the table showing the prices of what we have. Most—if not everything I take to Bartow—will be on sale, and I need to let people know that. So that will probably take an afternoon or two on the computer and printer.

There shouldn't be any problem getting this all done, everything packed and ready to go... as long as we don't procrastinate too long. I've got errands to run tomorrow, so maybe I'll start by getting those dowels and the boards. And a drill bit. He said we needed a drill bit, too.

So, I'll just pat myself on the back for thinking ahead and making plans. Now to just follow through on them. Wish me luck!

PS. We did get the supplies for making the head display. Step 1 of that project done. Today I plan to search for the sign pole and the box that holds my 'miscellaneous' stuff - tape, scissors, markers and so on. 

Friday, January 28, 2022

The Problem With Deadlines

How many times have you found yourself working in a frenzy to get some project done before a certain deadline? I've long since lost count, but then, I didn't try to keep count way back in school, when I had reports, science projects and other such things that were due at a certain time. Really, when you were in school, did you learn anything from having to go through a very uncomfortable day or weekend when you were rushing to get a project done? I didn't. I may have started that 10-page report a week before it was due, but I was still rushing to get it done before I had to turn it in.

It continued into my adult life, as well. Let's say I dreamed up a new costume that I wanted to wear at a certain sf convention. It was not at all unusual for me to be rushing, trying to get it done before I had to pack the car to go to that convention. I remember one costume in particular where I was still hemming the legs and arms as somebody else drove across 2 states to get to the convention.

I'd like to say I've finally learned my lesson, but that last week before Villicon where I was not only making prosthetics, but packaging them and packing them as well, that was not a joyful time for me. I spent an entire day standing at the kitchen island, sorting through prosthetics, packaging and pricing them, and then stuffing them into boxes in something resembling order. Since I'm usually sitting at my desk most of the day, it's no wonder I then spent 2 nights and a day suffering from leg cramps.

And the aftermath of that rushing around isn't really pleasant, either. Friday of Villicon, we got up and finished packing the car, dropped the dog at the kennel and drove into Orlando to the hotel. Once there, we spent about an hour unloading the car and carrying all our stuff to our tables - John was there with the Klingons, and I with my dealer's table. Then we each had to organize our stuff on our tables, and finally, about 2 pm, we hurried across the street to get some lunch. That was the first thing I'd eaten that day, and, it turned out, the only thing I ate that day.

I like going to conventions, but they are not relaxing for me. I'm an introvert, and being surrounded by a few hundred strangers grates on my nerves. Imagine spending 3 days listening to fingernails drug across a chalkboard. I need quiet time in my own place to truly relax.

It wasn't until Monday that I got to go back to my 'usual' day at home and could relax. Except I realized I wasn't really relaxed, I kept thinking I had to DO something to meet a deadline. No matter how many times I told myself I had no immediate deadlines, I still had the uncomfortable feeling that I did. That lasted for 2 days.

By Wednesday, I was over that 'Looming Deadline' fear, but I wasn't back to my usual routine yet. I found myself pushing aside almost all my daily chores in favor of... playing games. And not even the games I usually play; I dug up an oldie that I hadn't played in a year or so. Maybe that was the day I actually relaxed.

Now I'm facing another deadline, another convention, in about 3 1/2 weeks. I will be trying to make more product, more prosthetics, because I've got the raw material that is getting old and needs to be used before it goes bad. So I need to get started doing that. Tomorrow I'll be trying to catch up on the chores I didn't do today, and then I'll get started on that.

I hope.

 

Friday, January 21, 2022

Panic Time


This has been a hectic week. I finished editing a book on Saturday, and decided I'd better concentrate on getting stuff together for the convention we'll be at this weekend. This was in addition to the work I'd done last fall, taking inventory of everything I ever took to a convention to sell and organizing them in boxes so I could pick and choose what I wanted to take. My husband encouraged me to make more product (cosplay prosthetics) before the raw materials went bad, so we set aside a couple days to do that. Otherwise, I've been working on them every afternoon since last Saturday, and I've got quite a bit done.

And it's only Wednesday.

Wait, did I say it's ONLY Wednesday? Oh, no! It's already Wednesday! I've got product to package up, and then pack into the proper boxes, and displays to prepare, and table props to paint! AAAARRRGGH! (Run around the house like a chicken with its head cut off, and get absolutely nothing constructive done!)

Okay. That's enough panicking for now. Tomorrow, when I'm trying to finish everything up, plus pack a suitcase and load up the car, I may have a few more panic attacks. I try to keep them short, so I can use most of my time plugging away at what I need to do.

I suppose that since I have some control over how long they are, they might not be true panic attacks. Basically, they are moments when I feel overwhelmed by how much I still have to do, no matter how much I've managed to get done. And when I feel like that, I don't seem able to communicate to anybody else how to properly do one of my chores so that I can hand it off. Been there, done that, wasn't pretty.

I suppose I should train somebody—such as my husband, who's been prepping his own stuff to take for the Klingon table—how to do some of these chores for me before I'm overwhelmed. Then we can both be overwhelmed together!

No, I'm not sure that's a good idea. Better that one of us manage to remain calm even when one of us is being a headless chicken.

I am grateful that I did, once upon a time, sort through and organize all the boxes, and labeled them, so I know what boxes I want to take. You know, books are in boxes 4, 5 & 14. Prosthetics are in boxes 8, 10, & 12. Made it so much easier to sort out the ones I wanted to take with us.

Anyway, we're both going to be at Villicon this Friday, Saturday, and Sunday at the DoubleTree at the Entrance to Universal, 5780 Major Blvd in Orlando. If you're going to be there, stop by our tables and say hello! John (Lars Shoberg) will be at the Klingon table, and I (Trudy V Myers) will be manning the MoonPhaze table (basically across the aisle and down a table from the Klingons), selling prosthetics and books. We'd love to chat with you! 

Wednesday, March 2, 2016

Learning New Tricks 1

Remember that old saying, “Old dogs can’t learn new tricks?” Now that science says older people should be learning new things in order to keep their mind sharp, this ‘old dog’ is determined to learn new tricks. Even if I’m not a ‘spring chicken’ anymore.
Happily, there are plenty of opportunities to learn new things, ranging from free to costing quite a lot.
FREE - Tandy Leather offers free lessons in working with leather, from beginning to advanced. Generally, these lessons are offered on Saturdays for 5-6 weeks. I am in the middle of my 3rd class with them, learning to lace and sew leather projects. Usually, I come out of these sessions with 1 (maybe 2) projects done, but there are a lot of different lacing techniques to learn, so I am keeping my projects small and otherwise unadorned (no carving or stamping), and I am finishing one project a week.
A couple months ago, I discovered dospace, located in Omaha at 72 & Dodge. They offer crash courses in various computer programs. Afterwards, you can go in at any time (that they’re open) and use one of their (many) computers to practice and do projects in that program, so you don’t actually have to run out and buy it. I’ve taken 3 classes from them, and try to get there for a couple hours each week to practice on the programs we don’t have.
YouTube offers lots of instructive videos. We’ve watched many on using particular types of materials for specific pieces of costumes or props, and more on makeup techniques.
Company websites sometimes have instructional videos to show you how to use their products. Smoothon, for instance, will show you how to make molds, and how to use those molds to cast items in resin. Hubby really enjoys doing that, and that’s how he learned the method.
Television is a relatively ancient method of learning, but still an active teacher. I think the best (easiest) to learn from tv are cooking and sewing. There are other opportunities, such as doing a mosaic tabletop with pieces of broken china or tiny glass tiles, but too often, you get 1 or 2 10-15 second shots of some of the steps in doing that, with verbal instructions for the entire process delivered at 90 miles per hour. That has never been enough ‘learning’ for me to actually try it, although it is for other people.
Of course, you might get a book from the local library to teach you how to do whatever you have a hankering to learn.

Hmmm. I’m running out of room, and I haven’t even gotten to some of the learning opportunities that cost money. And actually, I intended to write about the different ways people learn, but I’ve wandered quite a ways from that topic. Okay, then, this is Part 1 of “Learning New Tricks”. Stay tuned for future parts, one of which may or may not show up next week. It all depends on if I find some other fascinating subject to talk about before then.

Thursday, February 18, 2016

Have Brain, Will Learn

Research has shown that as people age, staying active will help them stay active. Seems like circular reasoning, but actually, it works with brains, too. However, if you want your aging brain to ‘stay in shape’, you need to be learning new things.
When you learn something new, your brain creates new ‘pathways’ internally. If you do the same job, the same activities and hobbies for 40 or 50 years, your brain’s pathways are practically ‘set in stone’ (figuratively speaking). If you choose not to expand on them, then you will start doing those activities mindlessly. Why think about it? You’ve been doing things this way for decades!
‘Use it or lose it.’ That applies to brains, too. If you don’t exercise your brain, don’t give it new ‘problems’ to solve, it will eventually atrophy. Oh, you may have the same amount of gray matter in your noggin, but it will have forgotten how to wander off those stone pathways. I was particularly struck by the (aging) scientist in one documentary I watched who set aside her science research for a set amount of time each day to... sculpture with clay. Could she get any further away from studying the brain? Well, possibly, but clay sculpture seems pretty removed from research data.
Realizing that I had reached that ‘aging’ part of my life, I took this information to heart. Last year, I took a class on Theatrical Makeup. I had never made beauty makeup a part of my life, so this was definitely something new for me.
The class included methods of making appliances. If you’ve watched Star Trek, think of a Klingon’s forehead, a Ferengi’s ears and head shape, things like that. We had to make up our own character and apply that makeup - including at least one appliance - to ourselves as our final exam. I actually made 3 appliances for my character, and made a wig. Not only did I grossly underestimate how long the wig would take me to make, I had to solve problems, like how to figure out where the appliances would ultimately be attached to the wig, since they extended far into a human’s hairline. It was frustrating at times, but definitely fun!
I’ve recently started making appliances again. Boney foreheads, right now. Yesterday, I pulled my first latex forehead from my first mold. I think it looks pretty good, even if the latex did pool in the ‘boney’ areas. But that’s good, because they dried very thick and will stick up, off the forehead better.
Still, there are better materials that would produce better results. So I’m trying to decide what to try next. Hot foam? I’d have to build and calibrate an oven specifically for that, or make a backing mold that would allow the forehead molds be placed in a toaster oven (which we bought specifically for that purpose.) There’s also this stuff called dragonskin I’ve been meaning to try...

I anticipate lots more fun!

Friday, September 5, 2014

Dr Who? Experience

After the World SF Convention in London, we took a train to Cardiff in Wales.
The map showed our hotel as a straight shot east of the closest rail station, about 2 or 3 blocks. In real life, the road made an S-curve, and the distance was 4-5 blocks. But we got checked in, and it was still early afternoon. This room had a desk and chair, drawers and a closet!
My husband does not sit quietly well. He decided we should walk ‘into town’ and visit the museum. It was pretty much a straight shot to get there, but distance was a little vague. Well, if I reached the utter end of my endurance, we would have to figure something out.
The center of Cardiff is one big shopping area, no cars allowed, and a wonderful mixture of new buildings among the really old ones. We went through that, and turned a block too soon, but it was simple to correct our aim and get to the museum... 45 minutes before it was scheduled to close!
They had a wonderful section on history of Earth that I had to race through, and I had almost reached the point where people began to evolve when I was told they would close in 5 minutes. Bummer! Now for the walk back.
When I’m getting tired, I count my steps. It simply distracts my mind and keeps a rhythm. When we finally reached the hotel, I pretty much collapsed into a chair in the restaurant for supper. I had made it!
We had tickets for the Dr Who Experience the next morning. Again, the distance was kind of vague (I thought it was about half a mile), and this time, the directions were vague, too. (It wasn’t shown on the map.) “Go into that shopping mall across the parking lot, and just before you get to the theater, turn left, exit the building, follow the path, and you can’t miss it. Happily, the ‘path’ was marked by signs with a Dalek to show us which way to go.
I won’t spoil the experience by telling you much about it. On the other hand, they will probably change it soon, for what we experienced was the Matt Smith doctor. But it did have Daleks, and the Doctor tried to convince them that we were not worth ‘extermination’ because we were obviously an inferior type of human known as ‘shoppers’.
After this entertainment, we were in the museum, where John took lots of pictures. We weren’t allowed to touch anything, but I had John taking close ups of buttons and lace bits, lapel styles... And then it dawned on us - there are no Dr Who costume police! As long as your costume is recognizabe, you are enthusiastically accepted!
Even so, we still analyzed the costumes on display, especially those not made of cloth, like the rubber suit that looked like it had octopus suckers all over it. We could see a small slit (maybe 9 inches) in the lower back, but was that the only opening? Further study revealed the feet were separate, as were the hands, and probably the head as well. I am not eager to wear an entire rubber suit - think sauna - but I am trying to learn to make such prosthetics, so I was happy to study these items.
We could not take a tour of the studio, as the sets were being revamped, getting ready for filming. So that left the souvenir store.
John had a particular shirt he wanted, but he couldn’t find it. Bummer. I found a shirt and a poster for me, and he settled for the sweater vest of Sylvester McCoy’s Doctor. We went to the snack bar for something to drink, then walked back to the hotel, where we had a quiet afternoon as he surfed the net, trying to find the shirt he’d wanted.
We also did not find any jelly babies in the Dr Who shop, although we had found them at Stonehenge and in London. Not finding them in the DW shop was a real bummer!

To me, Cardiff was better than London! Not as crowded, in other words. I enjoyed our brief stay there. At one time, I would have hated the idea of walking that far to see a museum, but this time, I saw it as a challenge, one I managed to survive. And I got the reward of seeing a fantastic display about the History of Earth that I could have spent at least half a day in, if given the chance. The Dr Who Experience was icing on the cake.

Wednesday, July 23, 2014

Death Mask

A few days ago, I had a cast made of my head. I have costumes I want to make, and they all require a mask, partial mask, or prosthetics, so I needed a copy of my head to make such things and be sure they would fit.
The procedure took about 2 hours to get the cast of my head, and was done by a friend who has done this procedure many times, and two assistants. I was afraid I would experience claustrophobia as they layered items onto me.
We’d had a discussion beforehand on how to ‘deal’ with my long hair. I gathered it at the nape of my neck, and it trailed down my spine. They put a bald cap over my head, trimmed it, and glued it down. They left the back of the bald cap as long as possible, to cover as much hair as it could.
They applied plastic wrap to my shoulders and upper back, because the procedure is messy, and there was still hair to protect. Tiny ear plugs would let them get as much ear detail as possible. I could still hear, but not as well. Now they put mold release on my face and neck. I had to close my eyes for that, and keep them closed until the procedure was done. I was beginning to lose some contact with the world.
Silicon liquid had to be mixed and applied to my head before it solidified. That is a matter of a few minutes for each small batch. If they tried to mix it all up at once, a large portion of it would set before it could be applied. As they covered my ears, their voices became more muffled. When they covered my eyes, my little world became darker. A 10 or 15 minute wait let the silicon ‘cure’ enough to go on.
The final layer was plaster bandages. Again, I lost some ability to hear, and my world definitely went black. And another wait for the plaster to set. Have you ever worked with plaster? It warms as it dries. It was hard to stay awake. However, since I still had some hearing, and the workers frequently touched my arms to get my attention before they asked me a question (“How are you doing?”), and I had an arranged method of responding (thumbs up for okay), I didn’t experience any claustrophobia.
They pulled the plaster outer mold off, and then the inner silicon mold. We had started at 10 am, it was now noon, and we had a ‘negative’ mold and a support case for it.
After the materials had cured some more, our friend showed us how to make the positive casting. By 2 pm, we had a one duplicate head. It looked just like me.
It was ugly.
After a good night’s sleep, I figured out why I had such a strong negative reaction to it. Looking at it was like looking at myself, dead. There is no life in this resin head. It cannot smile, move its eyebrows, or open its eyes. It’s the same reaction I have when viewing a body at a funeral. I had heard of death masks; now I own a Death Head. I can deal with it.

How about you, would you like to have your very own Death Head? What would you do with it?